Набор от тренировки на части XMEIFEI, 1 бр., професионални тренировки за диамантно пробиване с мокри заварени, корони M14 или

Подробности

Diameter 6mm, 8mm, 10mm (solid segments), 12mm, 14mm (crown segments):

Total length:

75mm (6/8/10) or 100mm (12mm & above);

Thread:

M14 or 5/8-11(Make sure it can be installed on your machine);

QUANTITY:

1pc (choose one right size)

FEATURE:

Wet drilling:

Multi purpose for drilling hard granite, marble, engineering stone, concrete, brick.....:

Solid drilling bits less chips, not easy to break off:

High grade and special bond matrix extends drilling life and improve the working efficienc:

Operation tips:

1. Fix it on angle grinder tightly and rightly:

2. Turn on the angle grinder and let the core bits rotating in the air to check if there is balance problem.:

3. Hold the machine very steadily and give gentle pressure:

4. Start drilling as per following instructions:

1) place the drill at a 30 degree angle, it will help to position:

2) When Drilling the material till the hole start to form:

3) Bring the drill up into upright position slowly then keep drilling vertically.:

5. Do not give too much pressure or sway the core bits when working.:

Note:

Please allow 1-3mm errors due to manual measurement:

Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same :